sd-turbo GPU Requirements: VRAM & Cheapest GPU
sd-turbo has about 866M parameters. See exactly how much GPU memory it needs at FP16, INT8, and INT4, and the cheapest GPU to run it, with live hourly pricing from 5+ data center partners.
- Parameters
- 866M
- Min VRAM (INT4)
- 0.5 GB
- Cheapest (FP16)
- $0.48/hr
- Deploy
- < 2 min
To run sd-turbo for inference at FP16, you need roughly 1.9 GB of VRAM. The cheapest fit on Spheron AI is RTX 4090 24GB at about $0.48/hr. Quantize to INT4 to run it on a smaller, cheaper GPU.
VRAM required
Estimated peak VRAM including weights, activations, and KV cache. Add 10% headroom for production traffic.
- 01$0.48/hr$0.48/hr1× RTX 4090 24GBCHEAPESTAda Lovelace · GDDR6X
- 02$0.78/hr$0.78/hr1× RTX 6000 Ada 48GBAda Lovelace · GDDR6 ECC
- 03$0.78/hr$0.78/hr1× RTX 5090 32GBBlackwell · GDDR7
- 04$0.96/hr$0.96/hr1× L40S 48GBAda Lovelace · GDDR6
- 05$1.43/hr$1.43/hr1× A100 80GBAmpere · HBM2e
Live pricing aggregated from 5+ data center partners. Per-minute billing, no commitments.
VRAM required to run sd-turbo
Estimated peak VRAM at context length 4,096 and batch size 1, including weights, activations, and KV cache. Quantizing to INT8 (Q8) or INT4 (Q4) cuts memory roughly in half and in quarter.
| Precision | Inference | LoRA fine-tune | Full fine-tune |
|---|---|---|---|
| FP16 | 1.9 GB | 2.8 GB | 7.6 GB |
| INT8 | 0.9 GB | 1.4 GB | 3.8 GB |
| INT4 | 0.5 GB | 0.7 GB | 1.9 GB |
Cheapest GPU to run sd-turbo by precision
1.9GB
Full precision. Best quality, highest memory.
0.9GB
8-bit quantized. ~2x smaller, minimal quality loss.
0.5GB
4-bit quantized. ~4x smaller, runs on smaller GPUs.
Inference vs fine-tuning sd-turbo
Inference only holds the model weights plus a KV cache, so it is the cheapest setup. LoRA fine-tuning adds a small adapter and roughly 50% more memory. Full fine-tuning holds gradients and optimizer state on top of the weights, which is about 4x the inference footprint, so it often needs multiple GPUs even when inference fits on one. For sd-turbo, an on-demand RTX 4090 24GB instance covers inference and LoRA, while a full fine-tune needs several times that memory and often spans multiple GPUs. Check the live GPU pricing for current rates.
Similar models
Compare GPU requirements for models in the same class.
sd-turbo GPU questions
VRAM, GPU choice and cost questions for running sd-turbo on cloud GPUs.
sd-turbo has about 866M parameters. At FP16 it needs roughly 1.9 GB of VRAM for inference, including weights, activations, and KV cache. Quantized to INT4 that drops to around 0.5 GB. Leave about 10% headroom for production traffic.
For FP16 inference, the cheapest fit on Spheron AI is RTX 4090 24GB at about $0.48/hr. If you quantize to INT4, RTX 4090 24GB at about $0.48/hr runs it for less. Pricing is aggregated live from 5+ data center partners with per-minute billing.
LoRA fine-tuning adds roughly 50% on top of inference memory, so it usually fits the same class of GPU. Full fine-tuning holds gradients and optimizer state and needs about 4x the inference VRAM, which often means multiple GPUs for sd-turbo. The VRAM matrix above shows the exact estimate for each setup.
We read the parameter count directly from the model's safetensors metadata on HuggingFace, then estimate peak VRAM from weights, activations, KV cache, and framework overhead at your chosen precision. The estimate lands within about 15% of real-world use for most transformer models.
Quantized to INT4, sd-turbo needs about 0.5 GB of VRAM, so it fits on a 24 GB RTX 4090 with room for a small batch. At FP16 it needs roughly 1.9 GB, which usually means a data center GPU. The precision picks above list the cheapest GPU that fits each setup.
Yes. At FP16 sd-turbo needs about 1.9 GB of VRAM, which fits one 80 GB H100 with about 78 GB left for longer contexts and larger batches. The precision picks above show the cheapest GPU that fits each setup on Spheron AI.
sd-turbo needs one 80 GB GPU at FP16 (about 1.9 GB of VRAM), one 80 GB GPU at INT8 (0.9 GB) and one 80 GB GPU at INT4 (0.5 GB). All of these fit inside a single 8-GPU node, so no multi-node setup is needed for inference. Smaller cards such as 48 GB or 24 GB GPUs need proportionally more of them.
sd-turbo needs about 0.9 GB of VRAM at INT8, roughly half its FP16 footprint of 1.9 GB. The cheapest INT8 fit on Spheron AI is RTX 4090 24GB at about $0.48/hr. INT8 is the usual middle ground: half the memory of FP16, with a smaller quality drop than 4-bit quantization.
Running sd-turbo around the clock at FP16 costs about $350 a month on RTX 4090 24GB (730 hours at $0.48/hr). Spheron AI bills per minute, so stopping the instance when it is idle cuts that figure directly.
sd-turbo needs about 1.9 GB at FP16, 0.9 GB at INT8 and 0.5 GB at INT4. Use FP16 when output quality matters most or you plan to fine-tune, INT8 for most production inference, and INT4 when cost or GPU size is the constraint: the cheapest INT4 fit is RTX 4090 24GB at about $0.48/hr.